Flagstone Walkway Restoration in Summerhill, Toronto
Restoring a Backyard Flagstone Walkway
A homeowner in Summerhill, near Downtown Toronto, contacted CanRenovation to restore an existing backyard flagstone walkway. The joints between the natural stone slabs had originally been filled with soil, creating ideal conditions for weed growth and attracting small animals, particularly squirrels, that frequently dug into the gaps.
Over time, these issues had negatively affected the walkway's appearance, leaving it looking poorly maintained and less attractive.
Inspecting the Existing Base and Preparing the Joints
Before selecting the appropriate joint-filling materials, our team inspected the existing walkway to assess the type of flagstones and the base beneath them.
We carefully removed the soil and debris from between the stones, clearing the joints down to the underlying base.
Based on the characteristics of the natural stones and the existing base conditions, we selected a combination of crushed gravel and polymeric sand to rebuild the joints and improve their stability.
Rebuilding the Joints with Crushed Gravel and Sika Polymeric Sand
The deeper sections of the joints were filled with crushed gravel to create a firm supporting layer. We then applied approximately one inch of Sika polymeric sand to the upper portions of the joints.
This combination of materials was specifically chosen to suit the existing flagstone walkway and its underlying base, providing a more stable and durable joint-filling solution.
Sika polymeric sand was selected for its ability to form firm joints that resist erosion, discourage weed growth, and make it more difficult for small animals to dig into the joint material.
Throughout the installation, we paid particular attention to keeping the natural stone surfaces clean. After placing the gravel, we used a blower to remove loose dust and debris.
Once the polymeric sand was installed, we thoroughly cleaned the flagstone surfaces again before activating the sand with water.
Although watering may seem like a simple final step, the amount, intensity, and method of water application are critical to the proper activation and performance of polymeric sand.
Too little or too much water, or applying it with excessive pressure, can compromise the quality of the finished joints.
We carefully controlled the watering process to promote proper activation and achieve a consistent finish.
A Cleaner, More Attractive Backyard Walkway
The restoration significantly improved the appearance of the existing flagstone walkway without requiring the replacement of the natural stones.
The previously soil-filled gaps were replaced with neatly finished, firmer joints, giving the walkway a cleaner, more uniform appearance while reducing the exposed soil that had encouraged weeds and animal digging.
This flagstone walkway restoration project in Summerhill highlights how careful preparation, appropriate material selection, and attention to detail can refresh an existing outdoor space near Downtown Toronto.
Looking for flagstone walkway repair or outdoor maintenance in Toronto? CanRenovation provides flagstone walkway repairs, joint restoration, and outdoor improvement services across Downtown Toronto, Midtown Toronto, and the Greater Toronto Area. Contact us to discuss your project.